Support zu PDF-Direct

My PDF-Direct does not function, why?

First you should print a configuration side on your printer. under " Installed Personalities " and options an entry its him should go as follows is: version PDF Direct (Actively). Therefore you are sure that the module is installed correctly in the printer.

Control the system demands for the printer how, e.g., proficient goods LJ 4100 minima FW-Release 1.16, LJ 4550 minima FW-Release 1.009, LJ 9000 minima FW-Release 2.000. Jetdirect card) minimum 610 and exists enough RAM.

I get an Error 49. XXX?

This can be seem if the internal language of the printer is put in German. Change this as follows in English. Switch off the printer and remove the PDF-Direct. Start anew. To change to the language you give in your browser the IP address of the printer.
Select here "device" - At the top in the picture between " homepage and network ". Select in the left border "language" and put now the language in English, press now the button "taking over". Switch off the printer and put the PDF-Direct again in the printer